AUSTER J 1

87" span 0.60 - 0.90  4 strokes, 0.60  2 strokes. A near scale model with classic looks and majestic in the air. Wings detach for transportation (SEE TEXT BELOW RIGHT)

A quality kit of laser cut balsa and ply parts with pre-formed wirework, moulded canopy & two part moulded cowl. The kit also contains a comprehensive hardware pack consisting of closed loop for rudder, metal clevis's for all control surfaces, wheels, collets & screws etc.

Fuel tank not included, but available as optional extra, as more & more modelers are switching to electric. 

Below is a general photo of the kit contents so that you know to a large extent what the kit is about.

Picture by kind permission of Chris Southey

WILL MY ENGINE FIT THIS AIRCRAFT? Click this writing for dimensions.

If you wish to fly this aircraft electric, here below is a suggested set up and supplier.
http://www.4-max.co.uk/dbss-austerj1.htm 

Kit Price £160.00 + post & packing                       How to Purchase

We have developed specifically for this model, a new system to retain the wings (see photos below). The aircraft can now be assembled and taken apart very quickly on the field, without the use of screws or collets to keep the wings against the cabin top. This system has also eliminated the old problem of wing movement against the fuselage. We have also incorporated the use of these units in other aircraft.

Scale -1:5
Span - 221cm (87")
Approx Weight -4.0kg (8lb 13oz)
Channels - 4
Engines -.10-15cc (.60-.90cu. in
C/G position - 3 ³/₈" (85mm) from L/E
Wing 'G' test  = 6+

Full Decal Set: Military £25.00
Civilian decals (as photo immediately above): £10.00
Fuel tank 14oz rectangular (RA): £3.00

Return to Price list

Spares: (should you be unfortunate enough to damage your aircraft)

GRP Cowl £16.00	Please note: a minimum p&p of £2.00 will be charged on all small orders. How to Purchase
Vac formed top Glazing £8.00
Front and Side glazing set £5.50
Ribs, P.O.A.